|
|
Evaluation of lubricants for forming
Svobodová, Hana ; Podaný, Kamil (referee) ; Lidmila, Zdeněk (advisor)
The aim of this diploma thesis is experimental testing and evaluation of the suitability of lubricants for drawing stainless chromium - nickel austenitic steel X5CrNi18-10 and comparison of the results obtained from the work [51]. The testing was performed by modeling the friction between the traction edge and the retainer, which corresponds to the real production process at ACO Industries. The introductory part of the thesis describes the process of deep drawing, followed by a description of tribology and the effect of friction. The individual types and properties of lubricants are described in more detail. The main part of the work deals with the testing of lubricants. The results are then described and evaluated.
|
|
|
Experimental Study of the Efect of Lubricants on Rolling Contact Life
Šembera, Václav ; Ficza, Ildikó (referee) ; Nohál, Libor (advisor)
The aim of this bachelor’s thesis is to summarize the art of state in the area of the contact fatigue, lubricants and detection of the rolling contact fatigue exploiting the acoustic emission method. In the experimental part of this bachelor’s thesis are performed the rolling contact testing for the standard grease and the lubricant with EP additives by marginal exploiting the acoustic emission method. The effect of the lubricants on the rolling contact life is evaluated by basic rating life L10 stated by using Weibull distribution.
|
|
|
Using tribodiagnostics in predictive maintenance in company practice
Trost, Daniel ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
The thesis deals with the use of tribodiagnostics in predictive maintenance in corporate practice. It is generally dealt with maintenance, then tribodiagnostics in the company Škoda Auto a.s. Used offline and online diagnostic tools are described. Emphasis is placed on verifying the functionality of the newly purchased online filter unit. The experimental part is focused on detailed analysis of the above, including comparison of measurement results offline and online diagnostics. There is also an economic evaluation of savings obtained by operation the online filter unit. In conclusion, the tribodiagnostics recommendations are given for Škoda Auto a.s.
|
|
|
Suitable lubricants for deep drawing of carbon steel plate
Poloch, Milan ; Císařová, Michaela (referee) ; Jopek, Miroslav (advisor)
The task of the diploma thesis is to design and manufacture a testing jig, which will then be used for experimental testing of lubricants for drawing stampings up to 4 mm thick. The drawn material is deep-drawn steel D04. Friction modeling between the traction edge and the retainer was used for a real simulation of the production process. The shaped traction edge was constructed on the basis of a real part. A total of 6 types of lubricants were tested, of which one lubricant in the form of a paste was selected as the reference. The other lubricants were then compared with the reference value of the measured maximum tensile force. The aim was to ensure a lubricant in a consistency other than paste. Of the oil lubricants we received, none of the lubricants approached the optimum values.
|
|
|
Suitable lubricants for deep drawing of stainless steel
Doležal, Jan ; Chudík, Ivan (referee) ; Lidmila, Zdeněk (advisor)
This thesis solves problems of design and construction of testing equipment for testing lubricants for deep drawing and experimental evaluation of suitability of different types of lubricants for specified tests conditions. Most of all it is about finding environmentally friendly lubricant which would provide similar results as lubricants containing chlorine compounds when drawing a stainless austenitic Cr-Ni steel 1.4301. As for lubricants provided for testing by leading home and abroad manufacturers, the ATLAS 3374-140 from Quaker Chemical and the WISURA ZW 3356 from FUCHS, were evaluated as the most suitable environmentally friendly lubricants.
|
|
|
Suitable lubricants for deep drawing of carbon steel plate
Poloch, Milan ; Císařová, Michaela (referee) ; Jopek, Miroslav (advisor)
The task of the diploma thesis is to design and manufacture a testing jig, which will then be used for experimental testing of lubricants for drawing stampings up to 4 mm thick. The drawn material is deep-drawn steel D04. Friction modeling between the traction edge and the retainer was used for a real simulation of the production process. The shaped traction edge was constructed on the basis of a real part. A total of 6 types of lubricants were tested, of which one lubricant in the form of a paste was selected as the reference. The other lubricants were then compared with the reference value of the measured maximum tensile force. The aim was to ensure a lubricant in a consistency other than paste. Of the oil lubricants we received, none of the lubricants approached the optimum values.
|
|
|
Metody renovace závitových spojů zatížených statickým i dynamickým namáháním
Vích, Vladimír
This bachelor thesis focuses on methods of renovation of threaded joints loaded by both static and dynamic stresses. The thesis is elaborated in the form of a literature review. Its main part concentrates on the creation, division, production, and renovation of threaded joints. It describes methods used for the renovation of threaded joints. The conclusion of the thesis focuses on the control, lubrication, and calculation of threaded joints. The force conditions of a screw loaded by static and dynamic stresses are described there.
|
|
|
Nové trendy v motocyklových olejích
Steiner, Jiří
This bachelor thesis deals with the topic of motorcycle oils and overall with lubricant issues. In the first part, the work is focused on lubricants in general, how they are used, how these lubricants are divided, and last but not least, how lubricants are stored and transported. The next part is focused on engine oils. How engine oil is produced and what was their evolution, engine oil requirements, function, properties and classification of engine oils. Next part is about additives which are used and what kind of additives we have. The penultimate part is devoted to motor oils and to the problem of lubrication of two-stroke and four-stroke engines. In the last part, the thesis is focused on new trendy motorcycle oils and solves the production of modern motor oils.
|
|
|
Evaluation of lubricants for forming
Svobodová, Hana ; Podaný, Kamil (referee) ; Lidmila, Zdeněk (advisor)
The aim of this diploma thesis is experimental testing and evaluation of the suitability of lubricants for drawing stainless chromium - nickel austenitic steel X5CrNi18-10 and comparison of the results obtained from the work [51]. The testing was performed by modeling the friction between the traction edge and the retainer, which corresponds to the real production process at ACO Industries. The introductory part of the thesis describes the process of deep drawing, followed by a description of tribology and the effect of friction. The individual types and properties of lubricants are described in more detail. The main part of the work deals with the testing of lubricants. The results are then described and evaluated.
|
|
|
Using tribodiagnostics in predictive maintenance in company practice
Trost, Daniel ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
The thesis deals with the use of tribodiagnostics in predictive maintenance in corporate practice. It is generally dealt with maintenance, then tribodiagnostics in the company Škoda Auto a.s. Used offline and online diagnostic tools are described. Emphasis is placed on verifying the functionality of the newly purchased online filter unit. The experimental part is focused on detailed analysis of the above, including comparison of measurement results offline and online diagnostics. There is also an economic evaluation of savings obtained by operation the online filter unit. In conclusion, the tribodiagnostics recommendations are given for Škoda Auto a.s.
|
guest ::
